Makita 0088381699310, Инструкция по эксплуатации

Страница: 5 / 13

5
To remove the battery cartridge, slide it from the tool while
sliding the button on the front of the cartridge.
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip it
into place. Insert it all the way until it locks in place with a
little click. If you can see the red indicator on the upper
side of the button, it is not locked completely.
CAUTION:
• Always install the battery cartridge fully until the red
indicator cannot be seen. If not, it may accidentally fall
out of the tool, causing injury to you or someone
around you.
• Do not install the battery cartridge forcibly. If the
cartridge does not slide in easily, it is not being inserted
correctly.
Switch operations (Fig. 2)
CAUTION:
• Do not look in the LED light or see the source of light
directly.
Press the switch as shown below to change modes.
* The LEDs that will light up are the two rows on the
switch side.
Metal hook (Fig. 3)
Pivot the metal hook upright before using it.
The hook can be turned at 360° and removed.
MAINTENANCE
To maintain product safety and reliability, repairs and
maintenance should be carried out by a Makita Authorized
Service Center.
CAUTION:
• Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.
OPTIONAL ACCESSORIES
CAUTION:
These accessories or attachments are recommended for
use with your Makita tool specified in this manual. The use
of any other accessories or attachments might present a
risk of injury to persons. The accessories or attachments
should be used only in the proper and intended manner.
• Shoulder strap
• Makita genuine battery and charger
NOTE:
• Some items in the list may be included in the tool
package as standard accessories. They may differ from
country to country.
Main LED (20 pcs.) light up
Main LED (10 pcs.) light up*
Sub LED (1 pc.) light up
OFF