Floor Stripper
– User Manual (Rev0919)
Page 13 of 17
MAINTENANCE
Each MAKINEX VS-125/ VS-125-US machine has been individually checked after
manufacture to the highest standard. However, it is important to follow the service
procedures before each use, in order to prolong the life of this product and protect the
warranty conditions that apply.
Refer to Appendix for further Service Procedures.
GENERAL SERVICING
Bearing Grease Replenishment
Before use, ensure there is enough grease on the bearing to avoid bearing failure. The
method to replenish the grease is as followed:
Equipment:
•
Grease gun for zerk fittings
•
Rag or towel
1. Lay the Vinyl Stripper on its back.
2. Locate the zerk fittings underneath the
Vinyl Stripper. (See image to the right)
3. Connect the grease gun to the fitting.
4. Pump the grease until it is squeezing out
of the edge of the fitting.
5. Clean off the squeezed-out grease from
the fitting.
WARNING
Use the recommended grease or grease with the same specification:
Castrol Premium Heavy Duty Grease
CAUTION
Try not to mix different grease as it can cause bearing failure
