background image

Floor Stripper 

– User Manual (Rev0919) 

 

Page 16 of 17 

OWNER’S RESPONSIBILITY UNDER LIMITED WARRANTY: 

Strict adherence to the maintenance checks and with 

proof of scheduled maintenance 

history

  is  required  by  an  authorised  agent  or  qualified  mechanic.  It  is  the  consu

mer’s 

responsibility to deliver the machine in question to our service premises or to the premises 
of our appointed agent at the consumer’s expense for replacement or repair as applicable. 
Maintenance services are not covered under warranty. 

Claim Procedure 

  Contact MAKINEX by phone or email informing us of your machines problem or defect.  

  Once the extent of the claim has been assessed, we retain the right to compensate the 

consumer for such defect, or repair (parts & labour), or replace the machine under 
warranty.  

  All warranties will be carried out by MAKINEX authorised staff or appointed agents at a 

premises to be determined by the Manufacturer.  

  It is the responsibility (and cost) of MAKINEX or our appointed agent to return the 

machine to be repaired or replaced under warranty to the consumer- this is valid for 
domestic territories only (e.g. Australian units will be delivered within Australian territory, 
USA units will be delivered within USA territory and European units will be delivered 
within its designated country’s territories).  

 

Warranty calls will only be carried out by our representatives and not via client’s choice 
of repairer. We will not accept back charges for any work not carried out by our 
representatives, or accept any charges due to equipment being un-operational for any 
reason even during its warranty period.

 

 

Содержание VS-125-US




















Отзывы: