Page
20
of
37
3.3.2 Loading & Unloading at height
•
Note
: if simply raising handles and not operating lifting arm, the load will travel in a
downward arc. Therefore, both actions are needed to keep load just above the lift platform
Movement from
raising hands
only
•
Be certain the platform can take the weight of the load.
•
Only attempt to transfer the load to an elevated platform that can take the weight.
•
Have a firm footing
–
device can pull user towards load in high load, high reach situations.
•
Examine ‘LOAD
AND
REACH DATA’ section 4 and beware that manageable limits of the load can
be dependent on user (described in section 4).
•
Train and practice on loads of mid-range weight.
•
Always move handles slowly with heavy load at height.
•
With load in
hands neutral position
and load at height, manoeuvre
wheel close to the edge of the
raised platform then apply the
brakes
•
With brakes applied and load
slightly above the platform height,
raise hands to reach the load over
the platform
•
Continue to raise height of
powered lifting arm while
increasing reach to keep load
above platform until load is past
edge of the platform
•
In this fashion, the potential for
uncontrolled fall is always limited
•
Third party person assisting with
sling load (as explained in 3.2.6)
should stay clear until or unless
weight is resting on platform
UNLOADING PROCEDURE
Level movement
achieved by adjusting
hands and lifting arm
together
Controlling
force applied
by hands
Load of
machine
Содержание PHT-40
Страница 1: ...Rev 0917 ...
Страница 30: ...Page 30 of 37 7 SAFETY AND INSTRUCTION DECAL A B D C C A B C D E E F G I H J F G G H I J J J J K K ...
Страница 32: ...Page 32 of 37 CHARGER SPECIFICATIONS 3A ...
Страница 33: ...Page 33 of 37 9 DECLARATION OF CONFORMITY ...
