MAKINEX GEN-16P, Руководство оператора

Страница: 14 / 24

GEN
– 16P – User Manual
Page 12 of 22
OPERATING GENERATOR
WARNING
Read and adhere to all safety and operation instructions.
CAUTION
Always have the brake down while it is stationary.
STARTING THE GENERATOR
1. Remove all connections from the AC sockets.
2.
If the fuel tank is equipped with a valve, be sure the fuel valve is in the OPEN or ON
position before attempting to start the engine.
3.
To start a cold engine, pull the choke knob out to the CLOSED position. To restart a
warm engine, leave the choke knob in the
OPEN position.
4.
Turn the engine switch to the START position
and hold it there until the engine starts.
5.
When the engine starts, release the engine
switch, allowing it to return to the ON position.
6.
Once the engine has warmed up, set the
choke lever to the OPEN position.
CONNECTING ELECTRICAL DEVICES
The generator can supply 230V AC through 2 x 15amp sockets or 230V AC through
2 x 15amp sockets and 415V AC through the 20/32A socket.
1. Connect the appliance to the generator starting with the device that draws the most
current.
2.
Set the circuit breaker to ‘ON’.
SHUTTING DOWN THE GENERATOR
1. Disconnect all appliances connected to the generator.
2. Turn the ignition key to the OFF position.
3. Set the fuel supply valve to OFF if the fuel tank equipped with.
NOTE: To stop the generator in an emergency simply turn the ignition key to the
off position.