MAKERGEAR M2, Руководство пользователя, Страница: 8 / 24

4
Insert the 6 Position Power Supply Connector into the 6
Position Electronics Connector
in the electronics case—note that the power supply
connector should run under all other wires. Next, plug the
power supply into a wall outlet and flip the power supply
switch to the on position.
6
Download the MakerGear Quick Start App via
http://www.MakerGear.com/pages/QuickStart‐
App. Carefully follow the app's step‐by‐step instructions in
order to create your first print:
5
Connect Install driver (Windows users only),
connect to M2.
Check Platform Check starting height, check
bed level, make adjustments using
instructions provided by the app.
Load Filament Heat HBP & extruder, properly
extrude filament.
Print Select "Bracelet.g" from your SD card,
click "Print".
To access the
M2 Quick Start App Tutorial, visit
http://www.makergear.com/pages/quickstart‐app
SECURELY IN PLACE
*
PLA:
ABS :
220 °C hot end, 70 °C heated bed recommended.
245 °C hot end, 110 °C heated bed recommended.