Makerfire N10, Инструкция по эксплуатации

Страница: 5 / 10

After power on, when the current is greater than the stop current, the system starts to record the
capacity and energy, the time increases, and the REC changes from red to green. Long press the
"Next" button to select the stop current, and short press the button to adjust the value in turn.
The stop current of this product can be set between 0.01-0.30A.
Short press the "Next" button to switch to the main interface 4 (line resistance measurement
interface)
2
1
2
3
4
1
3
1. D+: DP, data positive signal
2. D-: DM, data negative signal
3. Mode display: QC2.0, QC3.0 mode
Short press the "Next" button to switch to the
main 3 (data recording interface)
Main interface 2 (quick charging identification interface)
1. Accumulated capacity after this boot
2. Accumulated energy value after this boot
3. Time display: accumulated record time of the
current load
4. Stop the current setting
REC: Recording status indicator, red REC means stop,
green REC means recording.
Main interface 3 (data recording interface)