MakerBot Replicator Mini+, Руководство пользователя

Страница: 5 / 34

WELCOME, LET’S GET STARTED
5
Warning: The MakerBot Rep 3D printer generates high temperatures. Always allow
the MakerBot Rep Smart E to cool down before you reach inside.
Warning: The MakerBot Replicator Mini+ includes moving parts that can cause injury. Never
reach inside the MakerBot Replicator Mini+ while it is in operation.
Warning: The MakerBot Replicator Mini+ generates high temperatures. Always allow the
Smart E to cool down before you reach inside.
Warning: There is a risk of shock. The MakerBot Replicator Mini+ is not user serviceable.
Caution: Do not leave the MakerBot Replicator Mini+ unattended during operation.
Caution: Do not print using materials that have not been approved by MakerBot for use with
the MakerBot Replicator Mini+.
Caution: The socket outlet must be located near the machine and must be easily accessible.
Caution: In case of emergency, disconnect the MakerBot Replicator Mini+ from the socket outlet.
Caution: The MakerBot Replicator Mini+ melts plastic during printing. Plastic odors may be
emitted during this operation. Make sure to set up the MakerBot Replicator Mini+ in a well-
ventilated area.
Caution: Never remove the Smart E from your MakerBot Replicator Mini+ or turn
off the MakerBot Replicator Mini+ during or immediately after printing. Always allow the
Smart Extruder to cool completely before removing it from the MakerBot Replicator Mini+ or
turning off your 3D printer.
Caution: Do not look directly at any operating LED component.
Caution: Children under 12 should be supervised by an adult.
Caution: Dust generation and accumulation should be minimized. Some dust and dry
powders can build static electricity charges when subjected to friction and create an ignition
hazard.
Safety alert symbols
precede each safety message in this manual.
These symbols indicate potential safety hazards that could harm
you or others or cause product or property damage.