Maker Factory ARDUINO MAKEVMA316, Руководство пользователя

Страница: 3 / 3

MAKEVMA316
V. 01 – 07/11/2017 3
4. What is Arduino ®
Arduino ® is an open-source prototyping platform based in easy-to-use hardware and software. Arduino ® boards
are able to read inputs – light-on sensor, a finger on a button or a Twitter message – and turn it into an output
– activating of a motor, turning on an LED, publishing something online. You can tell your board what to do by
sending a set of instructions to the microcontroller on the board. To do so, you use the Arduino programming
language (based on Wiring) and the Arduino
® software IDE (based on Processing).
Surf to
www.arduino.cc and www.arduino.org for more information.
5. Overview
This module can be used to send data by using infrared light. Commonly used in remote controls.
Arduino ® MAKEVMA316
A10 S
GND -
+
max. current ............................................................................................................ 20 mA
connection ...................................... 3 pins, + (middle pin, not used), - (ground) and S (signal)
output (S) ................................................................................... Schmitt Trigger, Active Low
dimensions ................................................................................................. 35 x 15 x 8 mm
weight .......................................................................................................................... 2 g
Attention: There is no current limiting resistor on the module.
© COPYRIGHT NOTICE
All worldwide rights reserved.
No part of this manual may be copied, reproduced, translated or reduced to
any electronic medium or otherwise without the prior written consent of the copyright holder.