Makefun Insect-Robot, Инструкция по эксплуатации

Страница: 16 / 38

Make you ideal fun
16
Figure-
24
Through the above steps, you have completed the general look of the mechanical legs,
Finally, the front and back legs bent, we can refer to the size shown in the figure on the wire
Figure
-25. P
ut "shoes" on the four legs of the robot and insert the wire into the slip-resistant
particles (to prevent slipping during walking).
Note: The insertion process will be more difficult, you can first use a sharp object to slip a
small hole in the non-slip particles (be careful not to prick your hand), so the wire will be easy
to insert non-slip particles.
Figure-25