5 |
P a g e
2.
INSTALL AND UPDATE BLOCK MODULES
If the mBot2, Ultrasonic Sensor 2 or Quad RGB Sensor pictures have a plus or update symbol on them, click
on this symbol to add or update these blocks.
Click the Add buttons
to add these block sets to your software.
3.
TURN ON THE MBOT2 USING THE SWITCH ON THE SIDE
The lights on both the ultrasonic sensor and the line follower sensor should turn on. If they are
don’t
, the
wiring is incorrect or unplugged, and needs to be fixed.
4.
Select
Upload
mode.
5.
Plug the mBot2 into a USB port and click the
Connect
button
.
Select your USB port from the list and click
Connect
.
Find Your Port
You can easily find your device by first
leaving your mBot
unplugged
. Click
Connect
and look at the list of USB ports.
Close the connect window, then
plug in
your mBot2. Click
Connect
again and
look for the port that has just been
added.
