manualshive.com logo in svg

Major SYNERGY MJ62-170, Руководство оператора и список запасных частей

Поделиться
Скачать
Major SYNERGY MJ62-170 Скачать руководство пользователя страница 21

www.major-equipment.com

17

1

2

3

4

Attaching hydraulic hoses to the tractor (RANSOMES model only)

When attaching the machine to the RANSOMES tractor ensure that FLOW, RETURN and DRAIN hoses are 

attached correctly. Incorrect attachment will result in blades spinning the wrong way.

AVANT hydraulic attachment

Please see separate sheet provided with this manual for hydraulic hoses connection information.

With the tractor linkage arm in lowered position and the machine set on level ground make sure that the linkage bolt is 

located in the middle of the slotted hole. This will provide flotation during mowing.

Ensure that there is space between the machine and the linkage arms. Avoid “bulldozing” the ground.

1

Linkage bolt

2

Slotted hole

3

AVANT linkage arm

4

Space between the body of the machine and 

the linkage arm

GROUND LINE

Содержание SYNERGY MJ62-170











































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды