manualshive.com logo in svg

Major SWIFT MJ71-190FM, Руководство оператора и список запчастей

Поделиться
Скачать
Major SWIFT MJ71-190FM Скачать руководство пользователя страница 7

www.major-equipment.com

3

Free-wheeling parts Hazard

The heavier a revolving part is, the longer it will continue to rotate after power is shut off. This characteristic is called 

‘free-wheeling.’ Blades, and various other components, drive shafts etc., will continue to move after power is shut off - 

often for several minutes. Injuries occur when:

•  Operators shut off equipment, and attempt to clean or adjust a machine before components have completely stopped 

moving.

• 

Shear bolt protection device in PTO shaft shears & the mowing parts are still spinning but the primary PTO shaft is 

stationary.  Operator awareness is the key to safety around freewheeling parts. Never raise the machine while the 

blades are still rotating.

Thrown objects Hazard

Machines throw material as a natural part of doing their job. Foreign objects, such as stones, sticks and other debris, 

may be taken into this equipment and expelled at tremendous speed. These objects are contained by the sides of the 

machine and by the rear/front rollers / guards / chain guards / rubber skirts depending on model of your machine.

Ensure bystanders are clear from the machine & cannot be hit with debris expelled from the machine. Bystanders or 

animals in the path of thrown objects could be seriously injured. Never operate machine with decks raised from the 

ground as this makes the front/rear protection redundant.

Hydraulic Hazard 

(if applicable)

Hydraulic systems store considerable energy. Careless servicing, adjustment, or replacement of parts can result in 

serious injury. High pressure blasts of hydraulic oil can injure eyes or other body parts. The following precautions are 

crucial:

•  Make certain the hydraulic pump is turned off.

•  Lower attached equipment to the ground.

• 

Confirm that load pressure is off the system.

A pinhole leak in an hydraulic hose is a serious hazard. A leak may not be visible, and the only sign may be a few drops 

of fluid. Never inspect hydraulic hoses with your hands, because a fine jet of hydraulic fluid can pierce the skin. 

Slips, Trips and Falls Hazard

Slips and falls often result from:

1. Slippery footing on the ground 

2. Cluttered steps and work platforms.

The potential for slips and falls can be greatly reduced by using good judgement and practicing good housekeeping on 

and around equipment.

Noise Hazard

Please note that the machine is normally used outdoors and that the position of the operator is seated in the driving seat 

of the tractor. It is advisable to consult the prescriptions listed in tractor operator and maintenance manuals. 

The acoustic pressure at a distance of 2.6m from the centre of the machine and at a height of 2.0m, with the implement 

operating in a no load condition  can reach 90 dBA. In a loaded condition & a PTO rate of 540 (1000) RPM the value can 

reach 97dBA. Higher rate of PTO input will result in higher noise levels. Always wear hearing protection.

Operating Safely

This MAJOR machine is designed to operate at a PTO rate which is stated in the Product Specifications part of this 

booklet. Ensure tractor PTO output is set at a correct RPM rate. This MAJOR machine must only be used for purposes 

outlined in the Intended Use section of this booklet. All other use is strictly prohibited.

Users should become thoroughly familiar with the contents of this manual before using, servicing and 

mounting the implement to the tractor and all other pertinent operations. Never wear jewellery, loose clothing 

such as ties, scarves, belts, unbuttoned jackets or dungarees with open zips which could become caught up 

in moving parts.

Always wear approved garments complying with accident prevention provisions such as non-slip shoes, ear 

muffs, goggles and gauntlets. Wear a jacket with reflecting stickers if the implement is used near public 

highways.

Consult your retailer, the Labour Health Service or your nearest equivalent authority for the information about 

the current safety provisions and specific regulations with in order to ensure personal safety.

ALWAYS DISENGAGE PTO, SWITCH OFF THE TRACTOR ENGINE AND ENGAGE THE PARKING BRAKE 

BEFORE MAKING ADJUSTMENT TO THE MACHINE.

Содержание SWIFT MJ71-190FM


























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды