Major SWIFT MJ71-190FM Скачать руководство пользователя страница 19

Страница: 19 / 89

www.major-equipment.com

Operating the Machine/Mowing

Never place limbs under the machine while rotors are turning. Rotors can remain turning for up to 1 minute

after disengaging PTO.

While operating this machine the PTO input rate should not exceed the RPM stated in the Product

Specifications section of this booklet. Always operate on level ground when connecting/disconnecting the

implement. This will prevent dangerous movement.

Never allow anyone to stand between the tractor and the machine. Ensure the machine is attached correctly

to the tractor as previously described. Always start up the tractor PTO at a low RPM. Build up to operating

speed, select a suitable forward gear & proceed to cut grass.

Hitch the machine as outlined in the previous section. Ensure bystanders are clear from the machine & cannot be

hit with debris expelled from the machine.

2. Locate the Parking Jack on its side under the PTO shaft on the stub provided (Trailed models only)

Ensure the PTO stand is flipped down. (Trailed models only)

4. Check PTO shaft is fully engaged on tractor PTO splines.

5. Raise the machine by hydraulic control. (Trailed models only)

6. Flip back axle and drawbar ram stoppers. (Trailed models only)

7. Lower the machine by hydraulic control to the ground or use tractor linkage controls.

8. After clearing the vicinity of bystanders, relocate the Wing Transport Locking Bars. Lower the wings by hydraulic

control. Ensure hydraulic ram is fully closed. (Winged mowers only).

9. Start up the tractor PTO at a low RPM.

10.

Build up to operating speed, select a suitable forward gear & proceed to cut grass.

Top Link position (flotation restrictor)

To set the top links into mowing position lower the wings on level

ground. Adjust the top link so the pin

(1)

is located in the middle of

the slot

(2)

. Lock the position by tightening the lock nut

(3)

Top links limit the wing lift and prevent damage to wing PTO shafts

and gearboxes.

Mowing Position

Содержание SWIFT MJ71-190FM


























































































Результаты поиска

Содержание SWIFT MJ71-190FM

Отзывы:

Бренды по названию

Популярные бренды

Major SWIFT MJ71-190FM, Руководство оператора и список запчастей

Результаты поиска

Содержание SWIFT MJ71-190FM

Отзывы:

Бренды по названию

Популярные бренды