Major MT632, Инструкция по эксплуатации, Страница: 6 / 8

6
4.2. USING THE THERMOCOUPLE (S)
1. Plug the therrnocouple(s) into the T1 or T2 input connector(s).
2. Press to turn on the thermometer. After 1 second the thermometer
displays the first reading. If no thermocouple is plugged into the
selected input or the thermocouple is "open," the display shows"- - - -".
4.3. CHANGING SETUP OPTIONS
Use Setup to change offset, sleep mode settings. The thermometer stores
the settings in its memory.
4.4. SETUP OPTIONS
Option Menu item Settings
Type TYPE K or J
Offset OFFSET T1 or T2
Sleep Mode SLP (sleep mode on) or OFF
(sleep mode off)
4.5. ENTERING OR EXITING SETUP
When the thermometer is in Setup mode, the display shows SETUP.
Press to start or exit Setup.
4.6. CHANGING A SETUP OPTION
1. Press or to scroll to the setup option you want to change.
2. Press to indicate that you want to change this setting.
3. Press or until the setting you want to use appears on the display.
4. Press to store the new setting in memory.
Notes: Setup is disabled in MAX MIN mode .
5. OFFSET
The primary display shows the temperature plus the offset and the
secondary display shows the offset. You can store individual offsets
for T1, T2.
6. AUTO POWER OFF MODE
The thermometer enters sleep mode (default). That is to say, the meter
will automatically shut off after 20 minutes if no button press occurs for 20
minutes. When the thermometer is in Setup mode, the display shows
SETUP. Press or to scroll to the"SLP" page . Press to indicate "ON"
or “OFF". Press or until the setting you want to use appears on the
display (fig.2). Press to store the new setting in memory. ON (sleep
mode on) or OFF (sleep mode off).
T1-T2
T1-T2
T1-T2
T1-T2