www.major-equipment.com
15
B
A
95mm
Flow Restrictor Tap
The speed of lowering and raising the machine is controlled by
a Flow Restrictor Tap which is located on the hydraulic hose
connected to the Body Ram. The adjustment should be carried out
by a competent and qualified person.
In order to adjust the flow:
•
Slacken grub screw
A
,
•
Turn the knob
B
until desired speed lowering/raising is
reached,
•
Lock the position of knob
B
by tightening grub screw
A
.
Breakaway
In order to protect the machine from damage, breakaway
unit is fitted to all MJ36 mowers. Should the machine run
into an obstacle, the breakaway latch will release and the
whole machine will swing back.
Tension in the spring is set at the factory to cater for the
most common cutting conditions. This setting is achieved
by keeping the distance of 95mm between the latch and
the nut.
To reset the machine into mowing position, reverse slowly
until the latch locks in its original place.
Mowing Position
Mowing Position
Mowing Position
