Major CYCLONE MJ31-200 Скачать руководство пользователя страница 17

Страница: 17 / 88

www.major-equipment.com

220519

Operating the Machine

Attaching machine to the Tractor

ALWAYS OPERATE ON LEVEL GROUND WHEN HITCHING/UNHITCHING THE IMPLEMENT. THIS WILL

PREVENT DANGEROUS MOVEMENT. NEVER ALLOW ANYONE TO STAND BETWEEN THE

TRACTOR AND THE MACHINE.

Three Point Linkage Models

1. Adjust both lift arms of the tractor until they are level in relation to each other.

2. Hitch the lower linkage arms to the Machine and connect the top link and PTO shaft. Ensure that the locking pins

are secure.

3. With the Machine lowered in its operating position, adjust the top link until the strap is slack, allowing the Machine

to produce a uniform finish in varying ground conditions.

4. Check the PTO shaft for length as described previously. Connect the PTO shaft. Ensure PTO check chains are

anchored to prevent PTO guarding from rotating.

5. Connect the hydraulic hoses to the appropriate connections (selected models only).

Trailed Models

Adjust the tractor hitch pin so that the hitch pin is approximately 400 mm (16”) from the end of the tractor PTO

shaft.

2. Adjust the machine hitch eye to suit the tractor drawbar height paying particular attention to keep both height

adjusting bolts as far as possible on the adjusting bracket. Careful adjustment of the hitch eye height at this stage

is necessary in order to allow the machine to function safely and correctly.

3. Connect the machine to the tractor. Ensure no one is standing between the tractor and the Machine.

4. Check the PTO shaft for length as described previously. Connect the PTO shaft. Ensure PTO check chains are

anchored to prevent PTO guarding from rotating.

5. Connect the hydraulic hoses to the appropriate connections (selected models only).

Содержание CYCLONE MJ31-200

























































































Результаты поиска

Содержание CYCLONE MJ31-200

Отзывы:

Похожие инструкции для CYCLONE MJ31-200

Бренды по названию

Популярные бренды

Major CYCLONE MJ31-200, Руководство оператора и список запасных частей

Результаты поиска

Содержание CYCLONE MJ31-200

Отзывы:

Похожие инструкции для CYCLONE MJ31-200

Бренды по названию

Популярные бренды