www.major-equipment.com
7
Key to Main Parts
Starting Regulations
Always check that any imminently dangerous conditions have been eliminated before using the machine.
Ensure all guarding is present & the operator is fully aware of the operations of the machine
Always ensure the pins lock the PTO shaft yoke ends onto the spline shafts on both the tractor and the
implement. An unlocked shaft could slip out of position, causing notable mechanical damage and serious
injury to both operator and bystanders.
‘A’ Frame
Gearbox
Cover
Rubber
buffer
Wing
Skid
Strap
Skirt
Castor
Wheel
Secondary
PTO Shaft
Wing Lock
(Floatation
restrictor)
Primary PTO
Shaft
Hitching to the Tractor
ALWAYS OPERATE ON LEVEL GROUND WHEN HITCHING/UNHITCHING THE IMPLEMENT. THIS WILL PRE-
VENT DANGEROUS MOVEMENT. NVER ALLOW ANYONE TO STAND BETWEEN THE TRACTOR AND THE
MACHINE.
1. Reverse the tractor, connect the hitch & secure in position with correct size drawbar pin. Ensure the tractor
parking brake is applied.
2. Connect the machine to the tractor,
3. Before connecting the PTO shaft to the tractor, check for length as previously described in this manual.
4.
Ensure shear-bolt safery device is fitted on hte machine PTO shaft and not the tractor PTO, as shown on the PTO
shaft guarding.
5. Ensure PTO check chains are anchored to prevent PTO guarding from rotating.
6. Connect the hydraulic hoses to the appropriate connection.
