![background image](http://html1.mh-extra.com/html/major-tech/mt784/mt784_instruction-manual_3807063005.webp)
5
This symbol adjacent to another symbol, terminal or operating
device indicates that the operator must refer to an explanation
in the Operating Instructions to avoid personal injury or
damage to the meter.
This WARNING symbol indicates a potentially hazardous
situation, which if not avoided, could result in death or serious
injury.
This CAUTION symbol indicates a potentially hazardous
situation, which if not avoided, may result damage to the
product.
This symbol advises the user that the terminal(s) so marked
must not connected to a circuit point at which the voltage with
respect to earth ground exceeds (in this case) 1000 VAC or
VDC.
This symbol adjacent to one or more terminals identifies them
as being associated with ranges that may, in normal use, be
subjected to particularly hazardous voltages. For maximum
2. SAFETY
2.1. Safety Information
1. INTRODUCTION
The MT784 is a CAT IV 600V True RMS 1000A AC/DC digital clamp meter
incorporating an 80 x 80 pixel Thermal Imager with a range from -20°C to
260°C. This clamp meter has a large 6000 count colour TFT LCD display
that provides fast sampling times and high accuracy measurements. The
meter has been designed to measure 1500V DC purposely for the Solar
industry, 1000V AC, K-Type temperature, frequency, capacitance, AC+DC
Voltage and resistance measurements, plus the Low Z range function has a
low pass filter to eliminate errors caused by "Ghost" voltages. The 100ms
Inrush current detects starting up currents of electric motors, input surge
current, or switch-on surge currents, this is the maximum instantaneous
input current drawn by an electrical device when first turned on.
The meter has a built-in record and store function and displays trend
capture, using the Bluetooth function the meter wirelessly transmits data to
the Android or iOS mobile App allowing the user to view, save, organise
and share recordings. Added features is Non-Contact voltage detection,
Peak Hold, Min/Max and Average, Data hold function and a built-in
flashlight for dimly lit areas. The double injection moulded housing is IP65
waterproof.
1. INTRODUCTION
The MT784 is a CAT IV 600V True RMS 1000A AC/DC digital clamp meter
incorporating an 80 x 80 pixel Thermal Imager with a range from -20°C to
260°C. This clamp meter has a large 6000 count colour TFT LCD display
that provides fast sampling times and high accuracy measurements. The
meter has been designed to measure 1500V DC purposely for the Solar
industry, 1000V AC, K-Type temperature, frequency, capacitance, AC+DC
Voltage and resistance measurements, plus the Low Z range function has a
low pass filter to eliminate errors caused by "Ghost" voltages. The 100ms
Inrush current detects starting up currents of electric motors, input surge
current, or switch-on surge currents, this is the maximum instantaneous
input current drawn by an electrical device when first turned on.
The meter has a built-in record and store function and displays trend
capture, using the Bluetooth function the meter wirelessly transmits data
to the Android or iOS mobile App allowing the user to view, save, organise
and share recordings. Added features is Non-Contact voltage detection,
Peak Hold, Min/Max and Average, Data hold function and a built-in
flashlight for dimly lit areas. The double injection moulded housing is IP65
waterproof.
2. KEY FEATURES
• 6000 Count 2.4” TFT Color LCD Display
• Built-in Thermal Imager with Max,Min and Center Crosshair Targeting
• 50Hz fast Thermal Image Frame Rate
• DC Current
• AC, AC+DC TRMS Current
• DC Voltage
• AC, AC+DC TRMS Voltage
• Resistance and Continuity Test
• Diode Test
• Capacity
• Frequency
• Duty Cycle
• Temperature with K-type Probe
• Flexible Coils Current
Содержание MT784
Страница 1: ...MT784 1500V DC THERMAL CLAMP METER WITH DATA LOGGER MOBILE APP INSTRUCTION MANUAL...
Страница 2: ...2...