Major tech MT767, Инструкция по эксплуатации

Страница: 8 / 12

8
Overrange Indication "OL" is displayed
Measurements Rate 2 per second, nominal
Input Impedance ≥10MΩ (VDC and VAC)
Display 6000 counts LCD
AC Current 50-60Hz (AAC)
AC Voltage bandwidth 50-1000Hz (VAC)
Bluetooth Connection
Connection through mobile device
Operating Temperature 5 to 40°C (41 to 104°F)
Storage Temperature
-20 to 60°C (-4 to 140°F)
Operating Humidity Max 80% up to 31°C (87°F) decreasing linearly
to 50% at 40°C (104°F)
Storage Humidity <80%
Operating Altitude 2000 meters (7000ft.) maximum.
Over voltage Category III 1000V, Category IV 600V.
Battery 3x "AAA" 1.5V Battery
Auto OFF approx. 15 minutes
Safety For indoor use and in accordance with Over
voltage Category II, Pollution Degree 2.
Category II includes local level, appliance,
portable equipment, etc., with transient over
voltages less than Over voltage Cat. III
4.11. General Specifications (continued)
5.1. AC/DC Current Measurements
1. Set the Function switch to the 600A AC/DC,
60A AC/DC range.
2. Press MODE to switch the AC/DC measurement.
3. If the range of the measured is not known,
select the higher range first then move to the
lower range if necessary.
4. Press the trigger to open jaw. Fully enclose one
conductor to be measured. The clamp meter
LCD will display the reading.
NOTES: Read and understand all Warning and Caution statements in
this operation manual prior to using this meter. Set the function select
switch to the OFF position when the meter is not in use.
5. OPERATION
WARNING: Ensure that the test leads are disconnected from the meter
before making current clamp measurements.