15
Timer button, and then press
key or
key to adjust timer
accordingly.
Note: When timer is set as “0”, it means continuous operation.
9. Press
Key to start the run. Once the electrophoresis starts, the LED
light next to the
button will light up.
10. Press
Key again to stop the unit at any time if necessary.
11.
When the run is completed, Press
Key to terminate a timed run, and
Turn the AC power OFF by the switch on the rear.
12. The programmed settings will be automatically saved into the system so
the next time you turn it on, the same settings as your previous experiment
will be displayed.
