13
Section 5
Operation Instructions
5.1 Control interface
You will be able to find six buttons and 4 LED indicators from the faceplate.
The LED indicates the status of the unit.
a. Setup Mode
(before pressing RUN/Start)
LED light indicates your current parameter. If you are setting a value for
Voltage, the Voltage LED will be lit.
b. Operation Mode
After you start the experiment, the LED light next to the RUN/STOP button
will light up to indicate unit under operation.
1.
– Select voltage value
2.
– Select current value
3.
– Timer button
4.
– Increase the Voltage, Current or Time
5.
– Decrease the Voltage, Current, or Time
