50
(Start calibration) (Arrival the target temperature)
(Key in the same value as thermometer)
4. Use
key and
key to adjust the T
2
value (temperature range
is -5
The device will start cooling from 0 to -5
when
temperature arrival -5
and then to start countdown from 30 min to 0 min.
The device will alarm “beep” while
. T
2
value is flashing,
and then use
key and
key to enter the real temperature as
thermometer. Press
key to store the updated value.
(Set a calibration target temperature) (Start calibration)
(Key in the same value as thermometer) (Arrival the target temperature)
5. Use
key and
key to adjust the T
3
value (temperature range
DOMINIQUE DUTSCHER SAS
Содержание MC-0203
