10000836
29
Vermont Castings, Majestic Products RHE Natural Vent Insert
B2 RHEBSL & RHEBXL Trims
For use with RHEDV32
Trim Assembly
RHEBSL
1. Install trim channels (left and right sides). Use two
(2) screws to assemble each piece.
2. Slide on the trim top channel and fasten it from the
back side.
3. Install the trim top deflector. Use two (2) screws to
fasten it. (Fig. 44)
4. Remove ALL plastic protective covering from brass
trim.
RHEBXL
To install the kit you do not have to remove any
piece of brass, just add the external pieces.
Remove the frame trim from the unit if it is already
installed.
1. Install trim channels (left and right sides)by remov-
ing the two (2) screws that hold the side brass trim
and put them back to hold both parts.
2. Slide on the trim top channel and fasten it from the
back side.
3. Remove the two (2) screws that hold the top brass
trim.
4. Install the two (2) brackets to the studs in the bottom
of the top channel. Use the nuts supplied with the
kit.
5. Reinstall the two (2) screws to hold the top trim
channel.
FP1261
deflector
1/03
Side View
Trim Top Deflector
Trim Frame Top
Section
FP1261a
Fig. 44
Trim top deflector.
Key Description
RHEBSLP
RHEBSLA
RHEBXLP
(1)
RHEBXLA
(1)
1
Trim Frame Flat Black
57926
57926
-
-
2
Trim Top Deflector
17634-PB
17634-AB
-
-
3
Trim Top Channel
57864
57844
-
-
4
Trim Side Channel
57862
57843
-
-
5
Trim Outer Top Channel
-
-
57861
57845
6
Trim Outer Side Channel
-
-
57863
57846
7
Fasteners Package (Not Shown)
54618
54618
57633
57633
IMPORTANT:
Only Trim Panel Assemblies Approved by
Vermont Castings, Majestic Products Can Be Used on
These Products.
ALL repair parts will be available from your local dealer.
When ordering, always give the following information:
Model and serial number, part description with finish and
part number;
Vermont Castings, Majestic Products reserves the right to make changes in design, materials, specifications, prices and discontinue colors and
products at any time, without notice.
(1) RHEBXLP or RHEBXLA to be used with RHEBSLP
or RHEBSLA trims.
(2) SL trim dimensions are for openings smaller than
27
¹⁄₂
"H x 40
¹⁄₂
" W (700mm x 1030mm)
(4) XL trim dimensions are for openings smaller than
30"H x 45
⁵⁄₈
" W (765mm x 1160mm)
RHEBSLP, RHEBSLA, RHEBXLP, RHEBXLA Trim Replacement Parts
5
3
6
4
6
4
1
2
FP1265
RHEBSL, RHEBXL
trim parts
1/03