Once the antenna and power supply have been installed and all cables have been properly connected, you must run a channel scan
before watching TV in order to receive maximum programs. Run a channel scan as once the antenna is moved or the TV loses a
channel.
Now you can enjoy the TV program after you finish running a channel scan.
Option 1:
Power from AC/DC power adapter.(Fig.4)
1.Connect the cable from Antenna to power insert input.
2.Connect the output connector of the power
to
DTV receivers or TVs.
3.Connect the AC/DC adapter to the 12V
DC jack
on the power supply unit, and plug the adapter into the
power socket.
insert
/24V
Option 2: Power from DC battery.
1.Connect the cable from Antenna to power
input.
2.Connect the output connector of the power
o DTV receivers or TVs.
3.Connect the DC 12V input wires to the 12V
DC jack on the power
.
4.Connect the other end of the wires "+" & " -" to the 12V DC system of vehicle/yacht.
(Fig.5)
insert
insert t
/24V
insert
Fig.2
Not included
in the package
Not included
in the package
Use the mast
bracket (n
) to fix the antenna on the boat
Option 2.
mount
ot included in the package
(Fig.2)
POWER SUPPLY CONNECTION
Power
insert
TV
AC/DC adapter
12V 150mA
Powered from
AC/DC power adaptor
Fig. 4
Not included
in the package
TV
DC 12V
+ -
Powered from
DC battery
Power
insert
Connect the “F” male connector of the coaxial cabl
e to the “F” female connector of the antenna, and w
ear the rubber
boot to the end of the connected “F” connector. (Fig.3)
Fig.3
F-type connector
linking bolt
Coaxial-cable
Water-proof kit
COAX TV CABLE CONNECTION
O
360 OMNI DIRECTION TV SIGNAL reception
Operation Instruction:
Note: For the best reception, please check the following con
ditions
1.
Keep the antenna away from the sources of interference: keep
the antenna away from
those big power consumption devices, such as air conditione
r, elevator, hair dryer and
microwave oven...etc.
2.
Install the antenna as high as possible: in digital terrestr
ial reception, if there are some
interceptions between antenna and transmission tower, it w
ill cause the signal loss
temporarily. So if the antenna is installed as high
as
possible, those interceptions will be
reduced.
Fig. 5
