SATMAR60 User Manual
www.majestic-global.co.nz
P
a
g
e
1
4
Equipment and cable installation
Equipment and cable installation
Equipment and cable installation
Equipment and cable installation
This offers a general explanation of how to install the IDU and satellite receiver
properly to the inside of vessel connecting with coaxial cable.
1. The Coaxial cable is routed from the antenna to the IDU inside the vessel.
2. After Once deciding where to place the IDU and satellite receiver, make sure that
both units are placed in a dry and protected area.
3. The IDU and satellite receiver should be placed away from any heat source and in
an area with proper ventilation.
4. Ensure that there are at least 3cm of space around both units for ventilation and
connection of cables. Do not stack the units on top of each other.
5. The following describes the basic wiring configurations for the SATMAR60
antenna system.
■
Connect the Coaxial cable to the SATMAR60 antenna port on the back
of the IDU
■
Connect one end of the supplied coaxial cable to the receiver port on the
back of the IDU
■
Connect the other end of the coaxial cable to the satellite receiver
