time ‘90’ (minutes) appears in the LED DISPLAY.
2. Repeatedly tap the SLEEP button to select a sleep timer of
90, 60, 30 or 15 minutes. Wait for about 10 seconds after your
selection for the unit to confirm the selection, the unit will play
for the selected length of time then turn itself ‘Off’
automatically.
3. To cancel the sleep timer, repeatedly tap the SLEEP button
until you see the OFF text on display then wait for 10 seconds
for confirmation.
4. To turn the unit ‘Off’ before the selected sleep time, press and
the ON/OFF button at any time.
Note:
There is no sleep indicator in this unit. To check the remaining
sleep time, tap the SLEEP button once.
NAP ALARM
The nap alarm can be used for e.g. a short “nap”. The function
only operates in standby.
• Press the unit button (3) to select the time after which the
device will beep. Select from 90 to 10 minutes or OFF in steps
of 10 minutes.
• After the selected time has elapsed, an increasingly fast beep
will sound.
DAYLIGHT SAVING TIME (DST) MOD
E
If daylight saving time (DST) is available in the summer time in
your State, you may use this option to adjust to the correct time
easily.
1. In standby mode, press and hold the unit DST button (3) for 2
seconds to advance the displayed time by one hour.
2. To cancel DST mode, repeat the above operation.
ALTERNATE DISPLAY BETWEEN TIME AND TEMPERATURE
MONTH-DATE DISPLAY
1. In Standby mode, press and hold the unit button (2) for about
3 seconds until “ON” appears in the LED DISPLAY.
2. The DISPLAY will alternate between the current Time, the
month date and temperature as follows:
