LED DISPLAY MODE
GET STARTED
• Select a proper place for the device such as a dry, and even
non slip area where you can easily operate the device.
• Inserting the Battery (Backup)
INSTALLING/REPLACING THE BACK-UP BATTERY
This unit is equipped with a battery back-up system, requiring one
DC3V CR2032 lithium battery (not included) to maintain the time/
calendar settings and radio presets during AC power outage.
Unscrew and remove the BATTERY COMPARTMENT COVER.
1. Install one fresh CR2032 lithium battery into the battery
compartment following the polarity diagram on the BATTERY
COMPARTMENT COVER. Use only the specified size and
type of battery.
2. Replace the BATTERY COMPARTMENT COVER and tighten
its screw.
Note: The unit will operate without a battery installed but your time
& alarm setting and radio presets will be lost and will have to be
reset in the event of power interruption or failure.
TIME Indicator
MONTH Indicator
Indicator PM
ALARM 1 Indicator
DAY Indicator
ALARM 2 Indicator
TEMPERATURE Indicator
