Using
Code Learning Mode
19
Learning from Another Remote Control
Before using learning mode, set both remotes on a flat
surface so that the target device’s remote control IR is
pointed at the RM-900’s learning eye, which is located at
the bottom of the unit. Keep a distance of 2-4 inches (5-10
cm).
1.
Press
for three seconds to
enter the confirmation screen.
Refer to page 10.
2.
Press and to scroll through the
options.
3.
Select
and press
.
4.
Select a device (for example TV).
5.
Point the target device’s remote control at the RM-900
learning eye located at the base of the unit (see Figure 1:
Front View). The RM-900 sequentially displays PAGE 1 and
PAGE 2 and the keys to be pressed to lead you through
the operation.
6.
The blinking frame denotes the key being learned. Press the
corresponding keys on the target device’s remote control.
Press the device key till it shows
, the next key will blink
and the remote code is recorded into the selected device key.
If it shows
please learn again.