26
27
INSTRUCTIONS FOR BEGINNERS
PREPARING FOR A RIDE
•
Go to the square/car park where you can find a lot of open space for lear
-
ning to manoeuvre.
• In the beginning, it is advisable to learn how to use a longboard without
switching on the electric drive. Thus, in case of loss of power supply, your
safety on the road will be higher and it will enable you to ride to your de-
stination avoiding problems.
•
Practise pushing away on the longboard and manual braking.
• When you feel safe enough, switch on the electric drive.
•
Moving the joystick gently upwards will allow a gentle start, moving the
joystick rapidly will cause fast acceleration (risk of losing balance on the
board). This also applies to braking, to brake softly you should gently move
the joystick down, a rapid shift will cause the board to stop suddenly (risk
of losing balance on the board).
•
Make as many turns of different lengths as possible. It will give you a chan
-
ce to avoid obstacles that may occur on your way in the future.
•
After getting control of the board and getting familiar with all its functions,
you will be ready to ride in public places.
REMOTE CONTROL FUNCTIONS
CAUTION!
1. We suggest setting Level 1 speed mode (up to 13 km/h) and Gentle
braking mode for beginners. Especially if it’s your first time riding
an electric skateboard.
2. Do not speed up or brake hard for your own protection.
3.
Hold the remote tightly while riding.
4. Charge the remote at least once a week. Each charging should last
3 hours.
5.
Avoid hitting the remote to keep your warranty valid. Warranty does not
cover mechanical damage.
6. If you have any issues with the remote, follow the instructions
to calibrate it again.
• Wheel size
Press ON/OFF Button to select WHEEL SIZE. Use CONTROL WHEEL
to change modes. Press DEAD MANS TRIGGER to return to home page.
D
R
80mm / AT
97mm
WHEEL SIZE
WHEEL SIZE
80mm
97mm
80mm
97mm
Содержание ONE AT
Страница 1: ...U S E R G U I D E ...