6
Majestic • MDVI30IN, MDVI35IN, MDVI30IL, MDVI35IL Owner’s Manual • 2205-981 Rev. G • 7/18
A. Appliance Certification
2
Product Specific Information
This product is listed to ANSI standards for “Vented Gas
Fireplace Heaters” and applicable sections of “Gas Burn-
ing Heating Appliances for Manufactured Homes and
Recreational Vehicles”, and “Gas Fired Appliances for
Use at High Altitudes”.
Majestic gas inserts are designed for installations into solid
fuel masonry or factory built fireplaces that have been in
-
stalled in accordance with the National, Provincial, State
and local building codes. Fireplaces are to be constructed
of non-combustible materials and, in the absence of local
or regional codes, meet criteria of NFPA 211. No additional
outside air source is required.
NOT INTENDED FOR USE AS A PRIMARY HEAT SOURCE.
This appliance is tested and approved as either supplemen-
tal room heat or as a decorative appliance. It should not be
factored as primary heat in residential heating calculations.
NOTICE:
This installation must conform with local codes.
In the absence of local codes you must comply with the
National Fuel Gas Code, ANSI Z223.1-latest edition in
the U.S.A. and the CAN/CGA B149 Installation Codes in
Canada.
B. Glass Specifications
This appliance is equipped with 5 mm ceramic glass. Re-
place glass only with 5 mm ceramic glass. Please contact
your dealer for replacement glass.
C. BTU Specifications
MODELS:
MDVI30IN, MDVI35IN, MDVI30IL, MDVI35IL
LABORATORY:
Underwriters Laboratories, Inc. (UL)
TYPE:
Direct Vent Heater
STANDARD:
ANSI Z21.88-2017 CSA 2.33-2017
Models
(U.S. or Canada)
Maximum
Input
BTU/h
Minimum
Input
BTU/h
Orifice
Size
(DMS)
MDVI30IN (NG)
US
(0-2000 FT)
30,500
17,000
#36
CANADA
(2000-4500 FT)
28,000
15,000
#37
MDVI30IL (Propane)
US
(0-2000 FT)
27,500
14,500
#52
CANADA
(2000-4500 FT)
25,000
13,000
#53
MDVI35IN (NG)
US
(0-2000 FT)
35,000
19,500
#33
CANADA
(2000-4500 FT)
32,500
17,500
#34
MDVI35IL (Propane)
US
(0-2000 FT)
31,500
16,500
#51
CANADA
(2000-4500 FT)
27,500
15,000
#52
Installation and service of this appliance should be performed by
qualified personnel. Hearth & Home Technologies recommends
HHT Factory Trained or NFI certified professionals.
