manualshive.com logo in svg

Majestic DBT33, Инструкции по установке и Руководство для владельца дома, Страница: 32 / 34

Поделиться
Скачать
Majestic DBT33 Скачать руководство пользователя страница 32

DBT33/DBT36/DBT39 -32- 

10002789/0

D

ECORATIVE

 B

AY

 W

INDOWS

Bay window kits are available for the DBT33, DBT36 & 
DBT39 model appliances.

When fitting the Bay Window Kits the original 
front frame/glass assembly MUST remain in 
place.  The Bay Window kit is fitted over the 
existing front glass.

Installation

1.  Remove the upper and lower brass window trims.
2.  Remove the existing bottom louvre assembly complete 

with the hinges.

3.  Remove the top louvre assembly
4.  Assemble the Bay Window Kit according to the instruc-

tions supplied with the kit.

5.  Place the 2 pieces of ceramic refractory along the base of 

the bay window, Fig. 59

6.  Hang the Bay Window Assembly over the existing front 

frame & glass assembly.

7.  Re-install the upper louvre assembly.

Do not remove the existing front frame and 
glass panel.

R

EMOTE

 C

ONTROLS

Optional remote control units are available to control different 
functions of the appliance.

 Model 

Function/s 

Controlled

 MRC1 

ON/OFF 

 MRC2 

ON/OFF 

and 

Temperature

 

MRC3  ON/OFF and Temperature control with a  

 

 

digital display and a programmable 24 hour  

  clock
 

IMT 

Wall mounted thermostat control

Fig. 55

Содержание DBT33



































Отзывы:

Нет отзывов