Como Corner Installation Guide
6
The Majestic Shower Company Limited
17 Flitch Industrial Estate, Chelmsford Road, Dunmow, CM6 1XJ
Tel44 (0) 8448 001 500
Fac44 (0) 1279 635 074 [email protected] www.majesticshowers.com
Assemble the inner Wall Frames to the outer profiles using the longer screws
provided in the remaining holes. Note that inner frame supporting the door has a
small metal tag protruding at the bottom which is to locate in the pierced slot at the
end of the Underframe.
Before screwing the frames together, use the self adhesive pads to position the
adjustable spacers over the wall fixing holes and adjust as required to compensate
for any lean in or lean out of the walls and to ensure that the faces of the inner
frames are plumb vertical. Once you are satisfied that they are, fully tighten the
screws.
Once you are satisfied that the faces of the inner wall frames are at 90 degrees to the
shower base, fully tighten the wall screws and replace the cover plate on the hinge side
of the door as shown.
7
8
