Majestic 500DVM, Инструкция по установке и эксплуатации, Страница: 10 / 68

10
75D2525
DVM Series Direct Vent Gas Fireplace
fInIshIng materIal
note: Any remote wiring (i.e. remote control, wall switch, and optional fan) must be done prior to
final finishing to avoid costly reconstruction.
Only noncombustible materials (i.e. brick, tile, slate, steel, or other materials with a UL fire rating
of Zero) may be used to cover the black surface of the appliance. A 300°F minimum adhesive may
be used to attach facing materials to the black surface. If joints between the finished wall and the
fireplace surround are sealed, a 300°F minimum sealant material (General Electric RTV103 or
equivalent) must be used.
The fireplace must be secured to the floor and/or to framing studs as shown in
Figure 6
. Use two
(2) wood screws or masonry/ concrete screws to secure fireplace to the floor. Use four (4) screws
to attach fireplace to framing. The side brackets or nailing flanges are designed to accommodate
two thickness of wall boards (1/2" or 5/8").
secure fIreplace to floor or framIng
Figure 6 -
Secure Fireplace to Floor and Framing Studs
FP2411
secure fireplace
Screws
Screws
Screws
Screws
Nail Flange
Nail
Flange
Framing
FP2411
Insulation Board
do not remove insulation board.
w
arn
Ing