Majestic fireplaces NVBC42 Скачать руководство пользователя страница 12

12

Majestic Fireplaces

®

 NVB Series B-Vent

7412950

Operating Instructions

Glass Information

Only glass approved for use in Majestic
Fireplaces  products may be used for
replacement.

Glass doors are optional. The appliance may be
operated safely without glass doors.

The use of any non-approved replacement glass will
void all product warranties.

Bi-fold glass doors MUST BE completely open or
closed while the appliance is in operation.

Care must be taken to avoid breakage of the glass.

Under no circumstances should this appliance be
operated with broken glass. Replacement of the
glass as supplied by the manufacturer should be
completed by a licensed qualified service person.

Replacement glass is available through your
Majestic Fireplaces dealer and should only be
installed by a licensed qualified service person.

Glass Cleaning

It will be necessary to clean the glass periodically.
During start-up, condensation, which is normal, forms
on the inside of the glass and  causes lint, dust and
other airborne particles to cling to the glass surface.
Also, initial paint curing may deposit a slight film on the
glass. It is therefore recommended that the glass be
cleaned two or three times with a non-ammonia
household cleaner and warm water (we recommend
gas fireplace glass cleaner). After that the glass should
be  cleaned two or three times during each heating
season depending on the circumstances present.

Clean glass after first two weeks of
operation.

Log Installation

1. Open glass door (if installed).

2. Remove logs from the packaging.

As with all plastic, these bags are not
toys and should always be kept away
from children and infants.

3. Place left rear log on rear log support. Ensure that

log is firmly positioned and there is no side-to-side
movement. (Figs. 15 & 16)

4. Carefully place Ember Left and Right Logs between

grate and burner. (Figs. 15 & 16)

Right Cross
Log

Left
Cross
Log

LeftRear
Log

Right Rear
Log

Embers

Ember
Right
Log
(Short)

Lava Rock

Lava Rock

Ember Left
Log (Long)

LG149

Fig. 15  NVB36 log placement.

Left Rear
Log

Left Cross
Log

Middle Cross
Log

Right Cross
Log

Right Rear
Log

Ember
Left
Log

Embers

Grate

Lava
Rock

Ember
Right

Fig. 16  NVB42 log placement.

LG148

5. Place the front of right rear log on the burner and the

back of the log on the rear log support.

6. Place the top logs onto the locator notches. Ensure

the logs are secure. (Fig. 15 & 16)

Содержание NVBC42

























Отзывы: