Majestic Appliances MJ-9900, Техническое руководство

Страница: 5 / 29

5
easier. Just pull it upwards and out, as shown in Fig.2
(Fig.2)
3. Your washer-dryer is equipped with a self-cleaning pump. It is therefore not
necessary to carry out cleaning and maintenance operation. Some objects
however, (such as buttons, coins, etc), may sometimes accidentally drop into the
pimp. Since these cannot be expelled through the drain pipe, they are trapped in a
special “anti-chamber” which can be reached through the front part of pump. Open
the cover of the filter, loose the knob in counter-clockwise rotation, then take out
the filter and clean it with water (see Fig.3 and Fig.4).
(Fig.3) (Fig.4)
Note: Re-assembly the filter carefully after cleaning, ensuring it is fit perfectly
and no water can come inside.
When you do not need a technician----
Even though your washer-dryer has been carefully designed and constructed,
something could still go a miss with your machine. Before rushing to please check
that the operations listed below have been carried out. In many cases you will save
time, money and bother. Our statistics show that many of the calls received by our
service centers could have been avoided with just a little more attention.
Check that:
 The plug is pushed right into the main sockets;
 The door is closed tight;
 The “ON/OFF” button has been pressed.
Check that:
 The tap is open and properly connected to the
inlet pipe;
 The inlet pipe is not bent.
Check that:
 The inlet pipe is placed at least 80cm/32 inches above
ground level.
The washer-dryer
fills and drains
continuously
The washer-dryer
won’t start
The washer-dryer
won’t fill with
water