3
majacraft
Assembling a Majacraft Rose
1. Prepare the components
These instructions demonstrate how to assemble your Majacraft Rose spinning wheel
2. Insert handle stop
We recommend that you find a clear work area where you can lay out all the components for
working on them.
The following tools are provided by Majacraft
- 4mm allen T wrench
- 2mm allen key
You will also need the following tools:
- Posidrive (Philips) screwdriver
Your wheel has been assembled at our workshop; it has been tested; it has been spun on; all screws
have been pre-fitted and some have been removed for partial disassembly.
Please unpack with care and retain the packaging. In the box will be:
Required:
1 - M6 25mm JCB (1”) bolt
(in the hardware bag)
4mm allen T wrench
(in the hardware bag)
Stem/Handle assembly
1 Base assembly
1 Stem/Handle assembly
1 Drive wheel with drive axle
2 Pedals
4 Plastic Bobbins
1 Spinning Head
1 Flyer
1 Crank and Conrod assembly
1 Rose Carrier
1 Hardware Bag (screws, etc) spare screws are included
2a
2b
