MAISTERmicro
13
Caution!
The device must never be operated without food. Always use appropriate dishes
and do not damage the inner ground of the cooking chamber.
Standby mode
In standby mode, the display is inactive. When you take the device in operation for the
first time, press "STOP / RESET" and you put the device directly into the standby mode.
Then no unintended settings can be made.
Please note: During the initial commissioning of some models the message "230 V
TOUCH 1 208 V TOUCH 2" appears on the display. Press "1" and "START".
By opening and closing the door you put the device to operation mode. After a few
seconds without input from the operating panel, the device automatically sets back to
standby mode (see chapter "9.3 Change settings").
Operation mode
In operation mode, the device is ready for operation. The message "READY" appears on
the display.
Manual microwave mode
In this mode, you can enter the power level and the cooking time manually.
1. Open the door and place the food in the middle of the cooking chamber.
2. Close the door.
3. Press "TIME ENTRY" and then use the keys "0" - "9" to set the desired cooking
time. Note the settings for the maximum cooking time (see chapter "9.3 Change
settings").
4. Select a power level
5. Press "START" and the cooking process starts.
The internal illumination of the cooking area enables you to watch the cooking process
and the food. The display shows the remaining time.
At the end of the regular cooking time an acoustic signal sounds and the message
“DONE” appears on the display. Open the door and remove the food.
Programming mode
In this mode, you can make your own settings and assign them to the preset buttons. The
settings are permanently stored on the device and can be changed by you anytime.
1. Open the door.
2. Press "1" for 5 seconds. An acoustic signal sounds and the display shows the
message "PROGRAM".
3. Press the memory key to which you want to assign the settings. The display shows
the desired memory key and the actual cooking time setting.
