MAISTERmicro
9
8
Installation and connection
Danger!
Danger from electric shock!
Before installation, make sure that your network matches the input voltage with
the technical specifications of the device. The device may only be connected if
they match.
Connection to the electrical power supply
The device is delivered completely assembled and is equipped with a power cable and
plug to connect it to the main electricity grid. Before installing make sure that the following
is correct:
The mains voltage corresponds to the voltage output of the device (240V / 50 Hz / 1 Ph);
to ensure a proper start-up, an input voltage is required, which deviates not more than +/-
6 % of the nominal voltage of the device. The mains supply must be protected by circuit
breakers!
