MyPower S4100 Series Switch Install Manual (S4152F-POE-AC V2) V1.0
Maipu Confidential & Proprietary Information
Page 15 of 23
l
Keep away from high power radio transmitters, radar transmitters,
and high frequency strong circuit devices
l
Provide electromagnetic shielding
Rack Configuration
The dimensions of the switch are designed to be mounted on a standard
19’’ rack. The dimensions are 436 mm x 44 mm x 420 mm (W x H x D).
Ensure good ventilation for the rack.
l
Every device in the rack generates heat during operation. Provide
good ventilation and fans for the enclosed rack. Do not stack devices
closely.
l
When mounting devices in an open rack, prevent the rack frame from
obstructing the switch ventilation. Be sure to check positioning of the
switch after installation.
If a standard 19’’ rack is not available, the switch can be placed on a clean
level desktop, leave an appropriate clearance around the switch for
ventilation. Do not place anything on top of the switch.
Installation Instructions
l
Read related chapters in this manual carefully or participate in
concerning technology training before the installation. Make sure all
materials, tools and other items required by the installation are
prepared, as well as a proper site for installation and debugging.
l
During the installation, it is required to use the brackets and screws
provided in the accessory kit, and proper tools to ensure stability and
reliability. Users should always wear antistatic uniforms and ESD wrist
straps to prevent damaging the switch, and should only use and make
standard cables and connecters. Be cautious to potential dangers
during the installation, and make protective preparations to avoid
accidents.
l
Clean the site after the installation. Please ensure the switch is well
grounded before powering it on. Users should also maintain the switch
regularly to extend its lifespan.
Security Warnings
l
Do not stare directly at the fiber port during operation to prevent eye
damage caused by the laser transceiver in the SFP optical module of
the switch.
l
Do not attempt to conduct any operation which may cause physical
injuries, accidents or damage the switch.