MP2800 Series Router Install Manual V1.2
Maipu Confidential & Proprietary Information
Page 43 of 47
router host.
1U Module Interface Cable Connection
§
Step 1: Insert RJ11 plug of 1U cable to LINE jack. Connect another
side to the external lines.
§
Step 2: After power on, please check ACT status of 1U interface
module. If the indicator is off, please check the line.
During the connection, make sure about the ID on the interface to avoid
inserting to other interfaces, which causes the damage of modules and
router host.
1VOP/2VOP Module Interface Cable Connection
Step 1: Insert telephone line to RJ11 interface of 1VOP/2VOP, and another
side to telephone.
Step 2: When having the phone call, pay attention to the indicator of
1VOP/2VOP card back panel. During the call, the indicator of each channel
should be on.
During the connection, make sure about the ID on the interface to avoid
inserting to other interfaces, which causes the damage of modules and
router host.
1VOS/2VOS Module Interface Cable Connection
§
Inset telephone line to RJ11/RJ45 interface of 1VOS/2VOS and another
side to small switch or external junction box.
§
When having the phone call, pay attention to the indicator of
1VOS/2VOS card back panel.
During the call, the indicator of each
channel should be on.
During the connection, make sure about the ID on the interface to avoid
inserting to other interfaces, which causes the damage of modules and
router host.
1ETE Module Interface Cable Connection
§
Inset RJ45 plug of 1ETE cable to RJ45 jack.
§
Connect another side of RJ45 plug to equipment wire.
§
§
During the connection, make sure about the ID on the interface to
avoid inserting to other interfaces, which causes the damage of
modules and router host.
1ST/1STA Module Interface Cable Connection
§
Inset RJ45 plug of 1ST/1STA cable to RJ45 jack.
文件使用
"pdfFactory Pro"
试用版本创建
www.fineprint.com.cn
