MaintTech CX300, Руководство пользователя

Страница: 23 / 28

CX300 MODULE – User manual Doc.2016002
-22-
Spectrum LPF Spectrum frequency range (in Hz)
Selected from a list: 200 Hz to 6400 Hz
Value cannot be more than
Max. Freq. Range (See Table 4)
Use measured
speed Enabled or disabled. If this is enabled, the speed value will be transferred in
CXSpectra
©
database, together with the total value, BE and spectrum
Total HPF High Pass Filter for Total Value calculation (in Hz)
Selected from a list: (none), 5 Hz or 10 Hz
Total LPF Low Pass Filter for Total Value calculation (in Hz)
Selected from a list: 200 Hz to 6400 Hz
This vale cannot be greater than
SpectrumLPF
Alarm vibration Enabled or disabled. Trigger measurement alarm condition.
Warning Vib Warning level for vibration (in Show Unit)
Danger Vib Danger level for vibration (in Show Unit)
Measure BE Enable/Disable BE measurement for this channel
Alarm BE Enabled or disabled. Trigger measurement alarm condition.
Warning BE Warning level for BE (in "gBE")
Danger BE Danger level for BE (in "gBE")
Delay RLY Delay in Relay action (seconds)
Selected from a list: 1 to 10 seconds
Map Warning Vib Map vibration Warning Alarm to a specific Relay
Selected from a list: (none), RLY1, RLY2, RLY3 or RLY4
Map Danger Vib Map vibration Danger Alarm to a specific Relay
Selected from a list: (none), RLY1, RLY2, RLY3 or RLY4
Map Warning BE Map BE Warning Alarm to a specific Relay
Selected from a list: (none), RLY1, RLY2, RLY3 or RLY4
Map Danger BE Map BE Danger Alarm to a specific Relay
Selected from a list: (none), RLY1, RLY2, RLY3 or RLY4
mA Output Enable/Disable current output (4 to 20 mA) for this measurement
8.3. TEMPERATURE MEASUREMENTS
Table 6
Configuration Description
Show Unit Temperature show unit, either ºC or ºF (or set to NOT CONNECTED)
Scale LO Scale LO value, from selection: -50, -25, 0 (in Show Unit )
Scale HI Scale HI value, from selection: 100, 125, 150, 200 or 300 (in Show Unit )
Alarm temperature Enable/Disable temperature alarms.
Trigger measurement alarm condition.
Warning Temperature Warning level for temperature (in Show Unit )
Danger Temperature Danger level for temperature (in Show Unit )
Map Warning Temp Map temperature Warning Alarm to a specific Relay
Selected from a list: (none), RLY1, RLY2, RLY3 or RLY4
Map Danger Temp Map temperature Danger Alarm to a specific Relay
Selected from a list: (none), RLY1, RLY2, RLY3 or RLY4