Mainsboost Charger MBC 100SV, Инструкция по установке, эксплуатации и обслуживанию

Страница: 16 / 20

- 16 -
8 TECHNICAL SPECIFICATION
Pump Mainsboost Charger
General Guarantee 3 years
WRAS approval 1611336
System patent no. 2349908
Features Pump type Peripheral
Mechanical seal EPDM / PTFE / Al. Oxide
Flexible hoses 2
Dry run protection
ü
Materials
Pump body Brass
Impeller Brass
Performance Maximum head (closed valve) 4.3 bar
Maximum working pressure* 600 kPa (6 bar)
Maximum ambient air temperature 40 o C
Min / Max water temperature Min 4
o
C / Max 35
o
C
Connections Pump connections G ¾ male
Flexible hoses Connections 22 mm push-in x 22 mm push-in x 240 mm long
Motor
Type Induction, auto-reset thermal trip
Duty rating Continuous
Electrical Power supply / phase / frequency 230 V a.c. / 1 / 50 Hz
Current (full load) 1.8 Amps
Power consumption 398 Watts
Fuse rating 3 Amps
Power cable (pre-wired) 1.5 metres
Physical Enclosure protection IPX4
Length 180 mm
Width 290 mm
Height (excluding hoses) 465 mm
Stuart Turner reserve the right to amend the specification in line with its policy of
continuous development of its products.
*Note: The maximum pressure that can be applied to the pump under any installation
conditions.
8.11 Noise: The equivalent continuous A-weighted sound pressure level at a
distance of 1 metre from the pump does not exceed 70 dB(A).