Version
：
V1.0
（
2020.02
）
Copyright © 2020 Mainlink All Rights Reserved
14
M52 Instruction
Quick start
1.
Preparing
Make sure all the connections are ready, including the antenna, Ethernet cable and so on.If
you connect a ethernet gimbal to M52 air unit, the GH1.25 interface is recommended for high
reliability.
2. Power on
The DC voltage is 9~28V. After power on, the POWER LED will be solid green.
Any question, please refer to the FAQ. It takes 15 seconds to start up. After the system
starts, the wireless transmission can be established.
3. Using PC to get video from ethernet gimbal.
3.1 Connect gimbal、M52 and PC as shown above。
Attention
：Please ensure that gimbal and PC on the same network segment. The
default IP of M52 is in the table below. The network segment of gimbal and M52 can be
the same or different. M52 can transmit video and data transparent.
M52 air unit default IP
192.168.1.200
M52 ground unit default IP
192.168.1.236
