TEST-TITE. IPS Corporation warrants each pneumatic test plug to be free from defects in materials and workmanship for a
period of THREE (3) Years from the date of manufacture, under normal use and service. This warranty does not apply to any
goods which have been subjected to misuse, mishandling, misapplication, neglect or repair other than by the manufacturer. If
any pneumatic test plug is returned to IPS Corporation in Collierville, TN and if upon examination, IPS Corporation finds to its
satisfaction that such pneumatic test plug is defective, IPS Corporation will replace the product at no cost. IPS Corporation is
not responsible for any special, indirect, incidental or consequential damages(including, but not limited to damages for loss of
business profits, opportunity, information, interruption or other pecuniary loss), arising out of or relating to the use, abuse or
misuse of Test-Tite products, even if IPS Corporation has been advised of the possibility of such damages IPS Corporations’
liability to the customer or any third person or party in all instances shall be limited to the actual purchase price of the
defective Test-Tite product. The warranty herein made is in lieu of other warranties, expressed, implied in fact or implied by
law and without the generality of forgoing disclaimer, is specifically in lieu of all implied warranties of quality or fitness for
purpose. Except as expressly set forth herein, the customer assumes the entire risk as to the acceptability, quality and
performance of the Test-Tite products and any decision made, or actions taken with respect to such Test-Tite products.
TRUEBRO. Truebro warrants its products against defective material and manufacture, (but not defective installation), for one
year after installation. Truebro’s liability under this warranty shall be limited to the repair or replacement of the defective
product. There shall be no other remedy available, including without limitation, recovery for incidental or consequential
damages, injury to person or property, or any other incidental or consequential loss. The preceding warranty shall be IN LIEU
of any other warranty, express or implied, including without limitation, any implied warranty of MERCHANTABILITY or fitness
for a particular purpose. Some states do not allow the exclusion or limitation on the period of warranty or incidental or
consequential damages.
AB&A. AB&A products are carefully inspected for manufacturing defects; however, it is not always possible to detect hidden
defects. Said products are warranted only to the extent that Seller will replace without charge, products proved to have
manufacturing defects within 6 months of the date of delivery thereof and provided Seller has been given an opportunity to
inspect the product alleged to be defective and the installation or use thereof. NO WARRANTY IS INCLUDED AGAINST ANY
EXPENSE FOR REMOVAL, REINSTALLATION OR OTHER CONSEQUENTIAL DAMAGES ARISING FROM ANY DEFECT. THE
WARRANTIES SET OUT ABOVE ARE THE ONLY WARRANTEIS MADE BY SELLER AND ARE EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS OR A PARTICULAR
PURPOSE.
CAUTION: Threaded joints should not be excessively tightened. Use thread compounds specifically intended either
for ABS or PVS assembly, as the case may be, DO NOT use linseed oil putty products for thread lubricant. Many oil-
based putty compounds are not compatible with plastics.
SPECIAL FINISHES: Limited Warranty: IPS Corporation warrants that its products are free from defects in materials
and workmanship for a period of 6 months. All PVD finishes (including Satin, Nickel, and Polished Brass), are
warranted for 15 years against corrosion, tarnishing or discoloring. This warranty does not cover damage due to
normal wear and tear, misuse, hard water, improper storage, improper installation, and improper maintenance.
Weathered finishes and uncoated finishes such as Oil Rubbed Bronze and Venetian Bronze naturally change over
time. Weathered and uncoated finishes are not warranted. Chrome Plated Drain finishes on kitchen, bath, or
lavatory drains are warranted for (1) year from date of purchase by the original purchaser.
Claims: All claims for defective products, shipment shortages, and billing errors must be made within one week after
receipt of goods. Claims should be submitted to your authorized dealer for local manufacturer representative. To
locate your local manufacturer representative, please call 1-800-888-8312.
Installation: Decorative items should be the last items to be installed after cleaning of the surrounding areas.
Care and Cleaning of Special Finishes: Use a soft cloth with water to clean. Do not use Abrasives, Caustic cleaning
agents or acid-based products, for they may permanently damage the finish and void the warranty.
