Courtesy of Main Resource, Inc. Visit us at
www.MainResource.com
or call 800 362-6740 for all your
telecom needs.
Page 8 of 16
To Use Account Codes With an Outgoing Call -
1. Press the line button
2. Press INTERCOM
3. Dial “*04” (call is automatically placed on hold)
4. Dial the account code then the outgoing call number
5. Alternately, press the preprogrammed ACCOUNT CODE button (call is not automatically
placed on hold), dial the account code and outgoing number.
Forward Calls
To Forward Calls to Another Extension:
1. Press OPTIONS
2. Then NEXT
3. And CFWD
4. Then PERS (for just prime line and intercom calls) or ALL (to forward all calls)
5. And SET
6. Dial the extension of the party to receive your calls
7. Press SPEAKER to end. When a call is forwarded from your extension, you will hear a short
ring burst to remind you that the call is being forwarded.
To Cancel Call Forwarding –
1. Press OPTIONS
2. Press NEXT
3. Press CFWD
4. Press PERS (if prime line and intercom calls were forwarded only) or ALL (for all calls)
5. Press CLEAR and SPEAKER to end.
Automatic Set Relocation –
If enabled, this feature allows you to move your telephone to another location and decide whether
Keep your previous programming or use the new location’s programming.
To Keep the Extension Number and Features From the Original Location –
Connect the phone and line cord to the jack in the new location. Press the flashing HOLD key or do
nothing until the HOLD light stops flashing. Your telephone in this new location will now use the
extension and features of the original location.
To Adopt the Extension Number and Programming of the New Location –
Connect the phone and line cord to the jack in the new location. Press the “#” button while the
HOLD light is still flashing.
Group Listening –
To Turn on the speaker while speaking over the handset (only the handset microphone remains
active) –
Press and hold SPEAKER for 2 seconds.
To Cancel Group Listening –
Press and release SPEAKER.
Monitoring Calls –