Courtesy of Main Resource, Inc. Visit us at
www.MainResource.com
or call 800 362-6740 for all your
telecom needs.
Page 13 of 16
Receive a Message at an Alerted Station –
When the message waiting light is flashing at your station, press INTERCOM and HOLD. You will be
connected to the station that initiated the message waiting notification.
LCD Messaging – Station Status
System-supplied messages (revealing the status of your station) can be programmed to display on
the LCD of the phone of a party trying to reach your extension. The attendant can provide a list of
available messages.
Turn Messages ON:
1. Press INTERCOM
2. Dial “*02”
3. Dial the desired code number or use default message 1 (“Back at”) or 2 (“Call”). When
using message one, enter the time in 12-hour format using the “#” as the colon. When
using default message 2, dial the telephone number where you may be reached.
4. Press SPEAKER to end. Your Intercom button will flash steadily.
Turn Messages Off –
Press INTERCOM and dial “#02”.
Assist Button
The preprogrammed ASSIST button will send a message to your supervisor, alerting them to your
need of assistance while on a call. To send a message, press ASSIST and the DSS of the user you
wish to ask for help. The desired extension number may be programmed in the ASSIST button for
ease of use. If the extension is busy, the message appears when the station becomes idle.
Station to Station Messaging
Use this feature to leave a reminder on a station that was busy or did not respond when you called.
Your telephone must be stored as a DSS/BLF button on the called telephone. Otherwise, your
messaging call is forwarded to the central message desk (usually the attendant). The attendant
will take your message and turn the message waiting light of the phone you wished to message.
To Use –
Make an intercom call. When you receive no answer, dial “*7”.
To Cancel –
Press INTERCOM and dial “#7”. Dial the extension number.
To Respond to a Message Reminder on your Telephone –
Press the lighted DSS button.
Programming Your Telephone
Program Automatic Dialing –
Automatic dialing allows you to store long numbers using one or two buttons, store feature codes
and intercom extension numbers.