DVR operation manual
30
Pic 5.1 record configuration
【
Channel
】
Choose the corresponding channel number to set the channel. Choose the all option to
set the entire channels.
【
Redundancy
】
Choose the redundancy function option to implement the file double backup function.
Double backup is writing the video files in two hard disks. When you do the double backup, make sure
that there are two hard disks installed. One is read-write disk and the other is redundant disk. (refer to
5.5.1)
【
SD card record
】
Choose this function,can realize up SD card record .default enable this function.
【
USB record
】
Choose this function,can realize down SD card or USB record(they can
’t be use in
the same time,but they can switch through switch button in the front panel).default enable this
function.
【
Length
】
Set the time length of each video file. 60minutes is default value.
【
Pre-Record
】
Record 1-30 seconds before the action. (time length is decided by the code stream).
【
Record mode
】
Set video state: schedule, manual or stop.
Schedule:
Record according to the set video type (common, detection and alarm)and time
section.
Manual:
Click the button and the according channel is recording no matter the channel in any state.
Stop:
Click the stop button and the according channel stops recording no matter the channel in any
