Remove the Dust Collector by holding the button
at the top. Use mild detergent to wipe off the dust from
each of the collection bars, then rinse with clean water
and dry thoroughly. Wait until the dust collector is comp-
letely dry and then put it back into the unit. The dust
collector is not entirely inserted into the unit until a
"click" sound is heard.
Cleaning the Appliance
Cleaning the Metal Pointers
After a certain period of time, the zigzag-shape metal pointers that release negative ion will accumulate dust and dirt that
will lower the efficiency of the appliance. Please clean the metal pointers whenever the dust collector is cleaned.
Two cleaning plates with springs are provided at the top part of the dust collector. To clean the metal pointers using the
cleaning plates, hold the top button of the dust collector and then repeat the process of pulling the dust collector out and
pushing it back. The cleaning plates will scrape off the dust on the metal pointers as you move the dust collector up and down.
The interior of the appliance also accumulate dust. Before putting the dust collector back after cleaning, invert the entire unit
for a few times to get rid of the accumulated dust.
The exterior of the unit can be cleaned using mild detergent and then rinsing with clean water and dry.
Do not allow any liquid to enter the unit. Wait until the unit is completely dry before use.
Cleaning and Protection
Unplug the unit every time before cleaning
Clean the dust collector and the metal pointers every one or two weeks or whenever there is unusual sound during operation.
Otherwise the unit will discontinue due to excessive dust on the collector. In general, a thorough cleaning will resume the unit
to normal operation.
Cleaning the Dust Collection
Pull out the dust collecfor
Wipe the collector with
a piece of damp cloth
6500 IM.indd 5
6500 IM.indd 5
2008-5-9 2:05:38
2008-5-9 2:05:38
