Switch between Jog and Continuation at
Memory Height
Long press the“m”key for 5 seconds until it displays “S-1”and “1”flashes.
Press the“up”key to switch to“S-6”; press the“m”key to set:
0=Jog (Long press a memory key 1/2/3/4, and it will stop after release)
1=Continuation (Press a memory key 1/2/3/4, and it will goes to default
height automatically)
Exit to operation interface by pressing the“m”key after setting.
The following steps can be set according to personal preference.
Display
Lock
：
“LOC”
Press both keys for 5s
S-3
S-4
loc
“LOC”
Unlock
：
Display
888
Lock & Unlock
Lock: Press both the “m” and “up” keys for 5 seconds, when it
displays”LOC”, the system is locked and the desk can’t go up or down.
Unlock: Press both the“m” and “down” keys for 5 seconds, when it
displays a number, the system is unlocked.
P15
Long Press 5s
Long Press 5s
Long Press 5s
Factory Initialization
If a new desk frame is replaced or to initialization default data;
press both the“up” and “down” keys for 10 seconds, the system is initialization
to default data after the buzzer rings once again, and it will display“RST”
；
the system is restored to its original settings.
S-6
Anti-collision Sensitivity
（
1
）
“S-3”anti-collision sensitivity while going up
Long press the“m”key for 5 seconds until it displays “S-1”and
“1”flashes. Press the“up”key to switch to“S-3”; press the“m”key to set
up sensitivity :
0= Closed
1=Minimum Sensitivity
......
8=Maximum Sensitivity
Exit to operation interface by pressing the“m”key after setting.
（
2
）
“S-4”anti-collision sensitivity while going down
Long press the“m”key for 5 seconds until it displays “S-1”. Press
the“up”key to switch to“S-4”; press the“m”key to set up sensitivity :
0= Closed
1=Minimum Sensitivity
......
8= Maximum Sensitivity
Exit to operation interface by pressing the“m”key after setting.
Press both keys for 5s
Press both keys for 10s